MN for Natural and Artificial Stone
Lithofin MN Power-Clean
for thorough cleaning in case of severe general and greasy dirt, residues of floor care products, etc. For regular cleaning of high-traffic and outdoor areas such as shopping centres and food courts. For final cleaning of new surfaces at building sites. This product is recommended for all types of natural stone, but especially for polished marble and limestone.
- concentrate
- strong effect
- free of acids, mildly alkaline
- low on solvents and odour
Coverage: approx. 10 to 30 m2/L
Packaging: 1 L, 5 L
Stocking: closed, cool, up to 3 years
Lithofin MN Builders Clean
cleans granite, gneiss, quartzite and other natural and engineered stones. Removes cement films, stubborn dirt residues, blooms, efflorescence, rust and rust discolorations. Also acts to prevent rust in hard stones containing iron. Not suitable for polished marble, limestone etc.
- concentrate
- strong effect
- acid based
Coverage: approx. 30 to 50 m2/L
Packaging: 1 L, 5 L
Stocking: closed, cool, up to 5 years
Lithofin MN Outdoor Cleaner
removes stubborn green and dark deposits as well as stains caused by trees or flowers from all natural and artificial stone surfaces. Flagstones, pavier, walls, paths, etc. are immediately restored to their original colour.
- fast acting and highly effective
Coverage: up to 15 m²/L
Packaging: 1 L
Stocking: closed, cool, dark, up to 6 months
Lithofin MN Stain-Stop
this special impregnator optimally protects absorbent, stain-sensitive natural and engineered stone surfaces against staining. Largely prevents penetration of oil, grease and water and makes further maintenance easier. Highly recommended in kitchen and bathroom. Poses no health concerns once dry.
Safe for areas where food is handled – this Lithofin product has been tested according to EU-Ordinance 1935/2004 by an independent institute. The product is considered safe for treating natural and artificial stone surfaces that come into direct contact with food stuffs.
- no health concerns once dry
- ready to use
- for indoor and outdoor use
- effective for many years
Coverage: approx. 7 to 15 m²/L
Packaging: 500ml, 1 L, 5 L
Stocking: closed, cool and dry, up to 3 years
Lithofin MN Stain-Stop >ECO<
this ready-to-use special impregnator is water based and nearly odourless. It has been developed specifically for highly absorbent limestone. The easy to apply treatment ensures the ultimate protection against water and oil stains and facilitates every-day maintenance.
- ready to use
- does not change the appearance
- effective for many years
Coverage: approx. 4 to 8 m²/L
Packaging: 1 L, 5 L
Stocking: closed, cool, frost free, up to 3 years
Lithofin MN Colour Intensifier
improves the appearance of rough, absorbent natural and concrete stone surfaces. Enhances the colours, accentuates the structure, and makes water and dirt repellent.
- ready to use
- for indoor and outdoor use
- no gloss
- ideal for concrete slabs and pavers
Coverage: approx. 7 to 15 m2/L
Packaging: 1 L, 5 L
Stocking: closed, cool and dry, up to 4 years
Lithofin MN Polish (Liquid Wax)
for occasional freshening up and polishing of stone surfaces, provides gloss and protection. Maintains the beautiful appearance of all polished surfaces.
- easy to polish
- contains solvents
- for indoor use only
Coverage: approx. 10 to 20 m2/L
Packaging: 1 L, 5 L
Stocking: closed, cool and dry, up to 3 years
Lithofin MN Polish
For enhancing and polishing stone surfaces, provides gloss and protection. Takes care of all polished surfaces, and maintains their beautiful appearance. No health concerns once dry (according to report FMPA).
- easy to polish
- low on solvents, water based
Coverage: approx. 40 m²/L
Packaging: 150ml, 500ml
Stocking: closed, cool and dry, up to 2 years
Lithofin MN Easy-Care
developed for continuous care of all types of stone surfaces. Cleans, enhances, and maintains the surface in one action. Coarse and polished surfaces become increasingly beautiful and richer in colour and structure with regular use. Ideal for impregnated or sealed surfaces.
- concentrate - very high yield
- does not form any layers
- non-leaching
Coverage: approx. 20ml per 10 L of water
Packaging: 1 L, 5 L
Stocking: closed, cool, up to 5 years
Lithofin MN Easy-Clean
for every-day cleaning of small stone surfaces such as kitchen bench-tops, tabletops, bathroom vanity tops and wall tiles. Enhances the appearance of the stone and leaves a pleasant odour.
- cleans, protects and maintains
- ready to use
- does not leave streaks
- no health concerns once dry
Coverage: approx. 20 m²/bottle
Packaging: 500ml
Stocking: closed, cool, up to 3 years
